:: NEXENTIRE ::

HOME>Service Client>Garantie

Material and workmanship warranty

- During the warranty period

Every product manufactured by NEXEN Tire Corp. is warranted against defects in mat-

erial and workmanship for the initial warranty period, which is the first 2/32nd of an inch

(1.6mm) of original usable tread depth or within 6 months from the period of purchase.

(as documented by new vehicle registration or tire sales invoice) and the tire will be re-

placed to the user free of charge. The cost of mounting, balancing and any other service

charges including applicable taxes must be paid by the user.

- After the initial warranty period

if above-captioned products becomes unusable due to workmanship and material defects,

the user must pay the cost of a comparable new products manufactured by NEXEN Tire

Corp. on a pro-rata basis.

Products manufactured by NEXEN Tire Corp. will be determines as per the percentage

of the usable tread depth. The user must pay for any associated service charges including

mounting and balancing of the tire.

OUT-OF-ROUND or OUT-OF-BALANCE

- Adjustment will be replaced only during the first 1/32nd of an inch(0.8mm) of original

usable tread depth. The user must pay for any associated service charge including

mounting and balancing of the tire. At the time of the first purchaser, the tire(s) must be

perfectly mounted and balanced, proper air pressure and wheel balance because ride

complaints are mainly caused by the driving axle on vehicle.

Period Warranty

- If, before wearing down to 2/32nd of an inch (1.6mm) of tread depth remaining(worn

down to the top of the built-in indicators in the tread grooves), NEXEN Tire covered by

this warranty becomes unusable for any reason with in the manufacturer's control for

maximum period of 48 months from date of purchase(or before 60 months from the date

of manufacture).

Tire is Unserviceable due to road hazards(cuts, snags, punctures & repair, recapped ,

bruises, impact break, chipping etc.), improper inflation, improper load, irregular wear,

incorrect speed rating tire, accident, fire, chemicals, chain damage, racing, abuse, run flat,

improper installation(wheel misalignment or tire/wheel assembly imbalance) or improper

condition (improper tire and vehicle maintenance, misuse and abuse);

Ride disturbance claims submitted after 0.8mm of treadwear or for 3 or more tires from the

same vehicle;

No portion of the warranty shall apply to any tires branded "NA"(meaning no adjustment) or

"BLEM"(meaning blemished);

Ozone or weather cracking on tires over 4 years of the date of purchase;

Tires fitted to anything other than the original vehicle;

Tire worn beyond tread wear indicator(2/32nd" tread depth remaining);

Accident, fire, chemical corrosion, tire alteration or vandalism;

Use in commercial applications for treadwear;

Use in any other country

At the time of purchase the tire(s) must be properly installed with proper air pressure and

the wheels balanced. Every 6,000 mile (9,500km), the tires must be rotated under the

proper air pressure and the wheel alignment checked.

Any tire to be adjusted must be presented to a dealer authorized by NEXEN Tire Corp.

You must retain and present this warranty card along with proof of date and place of

purchase in order to make a claim. The dealer's name and address authorized by NEXEN

Tire corp. from whom the tires were purchased must be also included on this warranty form.

You must pay costs rating to mounting, balancing and any other service charges including

applicable taxes.

Claims must be submitted in writing to brand owner for adjustment. Some states or coun-

tries do not allow the exclusion or limitation of incidental or consequential damage, theref-

ore the above limitation or exclusion may not apply to you. When you receive a defective

tire, please submit the written claim with the following information completely filled out.

- Tire size and ply rating

- Tire type(Pattern)

- Tread depth remaining

- Serial and DOT number

- Cause or type of defect

- Photograph clearly showing the defective parts

- Cut serial and DOT numbers